BIV-MET®
Wrapped composite sliding bearing, Copper-plated or tin-plated steel/bronze, DIN 1494 / ISO 3547, Maintenance-free, With lubrication pockets
Technical Detail
Specific load capacity static
≤ 250 [N/mm2]
Specific load capacity dynamic
≤ 140 [N/mm2]
Sliding speed
≤ 2.5 [m/s]
Friction value
0.04 [µ]
to
0.12 [µ]
Temperature strain
- 40 [°C]
to
+ 250 [°C]
Percentage contact area > 75 [%] [N/mm2]
MATERIALS
Support material
Steel copper-plated or tin-plated
Sliding Layer
CuPb10Sn10 [N/mm2]
TOLERANCE DETAILS
Housing Ø
H7
Bushing inner-Ø after mounting
H9
Shaft tolerance
f7 to h8 [N/mm2]
SHAFT MATERIAL
Steel, hardened or untempered, surface roughness ≤ Ra 0.8
PROPERTIES
For high load capacity and oscillating movement, as well as for rough operation and temperature load. Long-run lubrication because of lubricant storage.
RANGE OF APPLICATION
Track rollers, construction machines, crane construction, agricultural machines (impact loading)
MAINTENANCE
BIV-MET® is a low-maintenance bushing material. An initial greasing during installation is necessary, after that periodic greasing with oil or grease is mandatory.
MOUNTING ADVISE
Housing: Mounting bevel min. 1.5 mm x 15-45°
The application of an adequate force fitting mandrel is advisable. Grease lubrication of the outer surface may be necessary when mounting.
CAPTION
Special dimensions are available on request